How to fix bootloop with twrp (2023)

December 10, 2022 0

The term boot loop is often used to describe a situation where an Android device fails to fully load the operating system and instead continually alternates between the boot screen and a partially loaded boot screen. This can happen for many reasons but it is usually due to corrupted data in the phone’s internal storage or firmware issues. Thankfully, there are ways to fix this issue without having to send your phone in for repair. In this article, we discuss how to fix bootloop with twrp to get your phone working again.

How to fix bootloop with twrp (1)

Summary:If your phone is stuck in a boot loop, there are a few things you can do to fix it. First, make sure you have the latest version of Android software installed on your phone. Then download and install the TWRP recovery tool. After installing TWRP, use it to flash the latest phone firmware update on your device. If that doesn’t work then you can try to factory reset your phone.

necessary things

  • your android device
  • A computer running Windows or a Mac
  • MiniTool-Partitionassistent
  • USB cable to connect phone and computer

Guide: How to fix bootloop with twrp

Step one:

The first thing you need to do to fix the boot loop issue on your Android device is to download the twrp recovery image for your device. After downloading the image, extract it and save it to your computer's desktop folder.

Second step:

Connect your phone to the computer with a USB cable to access phone data on the computer.

Step three:

Open the command prompt, type ADB devices and press Enter. If your device appears there, you're ready for the next step. If not, make sure you have the correct USB cables and that your drivers are installed. If you installed the drivers correctly, check the "Allow USB debugging" box in your phone's developer options. If it still doesn't work after that, try restarting your computer and make sure your phone is set to MTP mode (File Transfer Mode).

Step four:

You need to enter adb restart bootloader to enter fastboot mode. To do this, press Enter on your keyboard.

step five:

At this point, type the name of the Fast Boot Flash Recovery TWRP file into the folder where you saved it (for example, Fast Boot Flash Recovery android_one_twrp). Press Enter again after typing this command for it to run successfully. Finally, type exit to exit the command prompt or CMD window when finished.

step six:

After following these steps, turn your phone off and wait for about a minute before turning it back on to see if the problem is resolved. If not, you need to do more troubleshooting. Clearing Text Application Data If simply restarting the phone did not resolve the issue, the next thing to try is clearing the text application data. This will force the app to rebuild the cache and it shouldn't delete any of your actual messages.

thirst step:

If you still have problems, try the same process again. However, for any other recovery, either present a file if available or use a factory reset through the Android system (also known as wiping all your data).

What is the boot loop?

Bootloop is a condition where the phone automatically restarts without any warning. This can happen for many reasons such as low battery, insufficient disk space to install an operating system update, or software corruption. There are two main solutions that we recommend below:

How to fix bootloop with twrp (2)

Solution 1: Boot into recovery mode, then wipe data/factory reset, which will clear your personal data like photos, contact list, etc.

(Video) How to Recover from a Bootloop | ROM is stuck | fix softbrick using TWRP

Solution two: Use ADB commands to remove specific files to resolve the software issue causing the bootloop.

Reason why bootloop occurs?

If you are very impatient and excited while using your phone, boot loop is likely to happen. Usually, boot loop occurs after upgrading or rooting because something cannot happen in the system due to corrupted data or files. Not only does this make it impossible to reset, but it also makes a factory reset impossible. That said, if there's a decent chance of repairing it with twrp, we should do it first! We will also discuss the method to fix bootloop with twrp in these blog posts. So be sure to check it out.

What is TWRP?

TWRP stands for Team Win Recovery Project. It is a custom recovery software to help you install and use Android OS on your phone or tablet. TWRP can be used when the device does not start correctly, as it allows you to access all the information stored in the memory and make changes, for example. B. install new firmware updates (buttons).

TWRP also offers several advanced features not available with stock restore, including backing up and restoring your phone's software. To install TWRP, you need to download an Android File Host installer and use the ADB command to start the installation.

Benefits of using TWRP

  1. It allows you to install custom operating systems and kernels.
  2. It gives the user the option to back up data, restore the phone from backups or create an Android.
  3. It offers a console that can be used for various functions, such as viewing logs and updating zip files.
  4. TWRP allows you to change the system partition without root access, which means that if there is a boot loop and your device cannot get past the Android logo due to damage or corruption in that section of the firmware, someone with little technical knowledge you can fix it.
  5. It can display an image of the same Android version or a newer version, which is useful for updating the latest security patches.
  6. You can wipe your Flashify data and backups (backups compressed in ZIP files) with TWRP without requiring root access, which means you no longer need to connect via ADB.

How do I install twrp?

Just follow the installation steps one by one carefully to successfully install this custom recovery on your device.

How to fix bootloop with twrp (3)

1) Download the latest TWRP file (You can download it here)

2) Transfer the downloaded file to your Android device's internal storage or SD card

3) Turn off the phone

4) Reboot in bootloader mode

To use:If you are using a Samsung phone, make sure you have enabled the "OEM Unlock" option in Developer Options before proceeding with the instructions below. Once this is done, immediately proceed with the next set of instructions as per the given order until you successfully complete the TWRP installation on your phone.

5) Press and hold "Volume Up", "Home" and the power button on your device until it enters bootloader mode, then release only the power button. You should now see the TWRP logo on your screen (note that this may vary depending on your device's Android OS version).

6) After the TWRP logo appears on the screen, release the "Volume Up" and "Power" buttons, then you should see a list of options in front of you

7) The first option is a data wipe/factory reset followed by a cache partition wipefix your phonealso the bootloop problem.

(Video) Fix Bootloop Issue After Flashing Custom Rom or Custom Kernel | Fix TWRP Error | Fix Custom Rom Boot

8) Then select “Recovery Mode” option by using Volume buttons to scroll up or down between options and Power button to select.

To use:Before selecting anything else in this menu, be sure to scroll down at least one line after selecting these two options to find Reboot system now, or leave blank for a normal reboot. You need to press the Volume Up buttons again while holding the Power button until the device successfully restarts in normal mode without any issues.

9) Now go back to the home screen, remove all recent apps with a three-finger swipe gesture, then go back to Settings >> Apps and select Show system apps.

How to fix bootloop with twrp (4)

10) Find the app called "Package Installer" or "APK Installer" on the system app page

11) You will see a list of options like Open, Uninstall, etc. Tap on the Open option which allows you to easily install apps from this app just like you do from the Play Store.

12) Select the APK file you just downloaded to your computer and wait for it to install.

13) After the installation is complete, tap the "Open" button again. This time, the message "Package installation succeeded" is displayed. This means that the Android operating system will now launch smoothly when the device is rebooted.

take precautions

  1. Android system must be rooted.
  2. You need a recovery tool like TWRP.
  3. Make sure the device has at least 80% charge. Otherwise, use a wall charger and plug it into an electrical outlet.
  4. Back up important data like photos, videos, music files, etc. in case something goes wrong while installing TWRP recovery on your Android phone.
  5. Make sure USB debugging and OEM unlocking are enabled on your device.
  6. Enable OTG storage in your Android phone settings. Here, too, the procedure differs from model to model. So check your device's manual or watch tutorials online.

Tips and tricks to avoid bootloop in the future

Boot loop is a frustrating issue that can often make your device unusable. We have already provided some instructions on how to fix bootloop with twrp. But here are some tips and advice to remember to avoid them again in the future!

How to fix bootloop with twrp (5)

Tip 1:Check for operating system updates or errors. If you encounter a bug, it may be helpful to update your operating system to avoid this issue in future boot loops.

Tip 2:Be careful what kind of programs and apps you download to your device! The more codes you have on your phone, the greater the chance that something will go wrong when updating or installing new programs, which can lead to a boot loop.

Tip 3:Do not use third-party software such as rooting tools, as they can worsen an already delicate process by changing your phone's firmware settings and cause errors that cannot always be fixed without completely erasing the device's data (which would remove all content ) . .

Tip 4:If you are experiencing issues that you are unable to resolve with your phone then you should consider backing up your phone data then performing a factory reset. The best way to do this is to select the "wipe" option in TWRP, which will wipe all personal information from your device without corrupting system files or programs that could cause problems.

Tip 5:A factory reset allows you to start fresh with your new phone. It also ensures that all programs and software on your current device are up to date by installing updates from the Google Play Store.

(Video) Fix TWRP/Orangefox Recovery Bootloop Issue | No OS Installed! Fastboot Mode Issue

common questions

How to know if your device is having problems?

Android is a complicated operating system that can be very difficult to repair. If the loop restarts after turning it on then there is probably a software or hardware issue with the phone. The best thing you would do in this case would be to doremove the batteryand reinsert it before turning it on again.

How to fix bootloop with twrp (6)

This avoids the common broken connections by jumping straight to the Android OS without going through the boot animation process. If that doesn't work, consider more drastic measures like "wiping" or reformatting your TWRP recovery mode data, which we'll discuss in the next blog post!

What can cause a bootloop issue?

A boot loop is an infinite loop in the system that can be caused by many factors. For example, some apps may cause issues with one or more dependencies that must be fully loaded in your device's operating system at startup.

How to fix boot loop error?

AFix boot loop error, you must determine the cause of the problem and take appropriate action. There are many things you can try to fix the error on your device running Android OS or other operating systems like Windows XP. One option is to use TWRP recovery mode which allows you to perform various tasks such as: B. format partition data.

However, this may not always work if there are deep system file structure errors caused by apps, drivers, third-party software, hardware issues, etc. defective. It is often enough to wipe all personal data and apps and then do a factory reset of the phone. reset to defaults.

How to fix bootloop with twrp (7)


A boot loop occurs when the phone software crashes and reconnects, causing an endless loop of restarting the device. The most common cause of this error is a faulty update. Now you can fix boot loop issues with your Android device.

If you have the common problem of a phone not turning on then it might be time to use TWRP recovery mode and factory reset to get things working again. We have detailed steps in our article on how to fix bootloop with twrp.

The steps to do this are simple enough for everyone to follow, so don't hesitate! If that doesn't work for you, we've also listed some other solutions that might help. We are also happy to help you if you need more information. Lots of luck!

You can also read:

  • How to fix a black spot on iPhone screen
  • How to fix a hard bricked phone

How to fix bootloop with twrp (8)

jennifer branet

(Video) Fix Macet TWRP, Orange Fox, Bootloop Lakukan Ini Mudah Teruji Berhasil

Related Posts

How to Restore Minky Fabric

How to Reset Govee LED Lights

How to use Grinds coffee bags

(Video) how to solve twrp problem | twrp STUCK at SPLASH SCREEN

How to find ceiling beams with magnets


How do I fix Bootloop with TWRP recovery? ›

Bootloops occur due to multiple reasons, so the best way to fix them is to find the specific thing that caused it and solving it, for example flashing ViPER4Android Fx can cause bootloop in android 10, but if you delete the post-fs script using your TWRP recovery, the problem is solved.

How do I fix recovery Bootloop? ›

  1. Android Stuck on Boot Loop.
  2. Click Fix System Issues.
  3. Click Start Button to Continue Fixing.
  4. Start to Download Firmware Package.
  5. Get Your Phone into Download Mode.
  6. System Fixed Successfully.
  7. Remove and Reattach Its Battery.
  8. Hard Factory Reset The Device.
Sep 27, 2022

How do I fix Bootloop after flashing custom recovery? ›

This problem occurs when you flash TWRP if you have root installed. To avoid, remove root before installing TWRP. Oh, I should mention to get into bootloader from TWRP, simply use the adb command "adb reboot bootloader". Should work, worked for me.

Can boot loop be fixed? ›

Soft Reset the Android Phone

Turn off your Android phone and remove the battery. If you're unable to remove the battery on your specific model of phone, leave the device powered off for at least five minutes. Turn the device back on to see if the boot issue has been resolved.

What causes infinite boot loop? ›

The Windows boot loop problem is often the result of a device driver, a bad system component or hardware such as the hard disk that causes a Windows system to spontaneously reboot in the middle of the boot process. The result is a machine that can never boot completely and is stuck in a reboot loop.

How do I get out of infinite boot loop? ›

The quickest way to get your laptop out of infinite boot loop is to force a shut down using the Power button, and then turning it back on again. If that doesn't work for you, perform a Safe mode restart using a boot key specific to your laptop/PC.

How to use adb to fix bootloop? ›

If you cant get it to boot in Recovery you can always use (ADB) and type in the command] > adb reboot recovery <--- Hit Enter now your Device will reboot into recovery mode. If your not familar with adb or even know what adb is there is a link on the bottom of this page for the sdk download and a gude on the adb.

How do I fix Bootloop without factory reset? ›

Here's the guide:
  1. Turning off the phone, press Volume down and Power keys simultaneously for a few seconds to enter Custom Recovery mode.
  2. Choose Advanced option in the Custom Recovery menu.
  3. Select "Wipe Delvik Cache". ...
  4. Go to "Mounts and Storage" and select "format/cache" option. ...
  5. Reboot your device.

How do I fix my Android phone that won't boot into recovery? ›

Step 1: Press the Volume Down button to go to the wipe data/factory reset option. Step 2: Press the Power button to choose the option and start the process. Step 3: Upon the completion of the process, your device will reboot normally, and set it up again to use your device just like you use it normally.

Is it necessary to unlock bootloader before flashing? ›

No, it's not necessary to unlock bootloader for rooting. But flashing custom ROM or recovery is not possible without unlocking the bootloader because locked bootloader verify the ROM or recovery being flashed for company's official signature and custom ROM doesn't contain the official signature.

Can we flash custom recovery without unlocking bootloader? ›

On any Android device, you have to first unlock the bootloader to install TWRP Recovery.

What to do after installing TWRP? ›

After installing a ZIP file, TWRP gives you a few options: Home, Wipe Cache/Dalvik and Reboot System. The first option takes you back to TWRP's main screen, and the third option should be self-explanatory. The second option, Wipe Cache/Dalvik, is one that should be noted.

How do you break an automatic repair loop? ›

But, there is no need to worry as our solutions will work for most causes of a Windows 10 automatic repair loop.
  1. Run Fixboot and Chkdsk Commands. ...
  2. Perform a System Scan in Safe Mode. ...
  3. Restore the Windows Registry. ...
  4. Disable the Automatic Repair Tool. ...
  5. Disable Early Launch Anti-Malware. ...
  6. Reset Your Windows 10 Device.
May 10, 2022

How do I fix a corrupted boot? ›

Method 1: Startup repair tool
  1. Start the system to the installation media for the installed version of Windows. ...
  2. On the Install Windows screen, select Next > Repair your computer.
  3. On the Choose an option screen, select Troubleshoot.
  4. On the Advanced options screen, select Startup Repair.
Feb 8, 2023

Can faulty battery cause bootloop? ›

1 Answer. Yes a broken battery connector will cause your phone to boot-loop.

How do I bypass undoing changes? ›

1. If you are stuck on the “Undoing changes made to your computer” screen, turn off your PC. Now, turn on the PC and turn it off again. Do this 3-4 times, and your PC will be triggered to open the Recovery menu.

How do I access advanced boot options? ›

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

How do I reset my bricked Android? ›

Attempt to reset it by holding the power button down for 10-15 seconds (or pulling your battery if you've got an older device). You may also want to try plugging it into your computer, you can be pretty sure that your phone is hard bricked if it is not detected by your PC.

Does adb work in recovery mode? ›

Enable ADB (1/2): enable USB debugging

Connect the device to Mac or PC in recovery mode. Now open terminal/CMD in computer and go to platform-tools/. type and enter adb devices to check if the device is connected in recovery mode.

How do I force adb on Android? ›

Enable adb debugging on your device

To use adb with a device connected over USB, you must enable USB debugging in the device system settings, under Developer options. On Android 4.2 and higher, the Developer options screen is hidden by default. To make it visible, enable Developer options.

How do I get my phone out of maintenance boot mode? ›

Alternate Method
  1. Simultaneously press and hold the. Volume Down button. (left edge) and the. Power. ...
  2. From the 'Maintenance Boot Mode' screen, select. Normal Boot. . ...
  3. Allow several seconds for the reboot process to complete. If your device won't power back on, partially charge the device then retry.

How do I force boot into recovery mode? ›

Select Start, Power, and then press and hold Shift key while clicking Restart. Select Start, Settings, Update, and Security, Recovery. Under Advanced startup, click Restart now.

What is the possible solution to the problem of doesn't boot? ›

If your computer won't boot up, the first thing to do is make sure your PC is plugged in and the power switch is turned on. If it is and it still won't start, try plugging your computer into a different outlet. If you're using a power strip or surge protector, plug it directly into the wall instead.

How do I force my Android phone to restore? ›

How to perform Factory Reset on Android smartphone?
  1. Later Models. (Android version 5.0 or above)
  2. Tap Apps.
  3. Tap Settings.
  4. Tap Backup and reset.
  5. Tap Factory data reset.
  6. Tap Reset Device.
  7. Tap Erase Everything.
  8. Tap General & Backup and reset.
Oct 5, 2022

Can you force unlock a bootloader? ›

To unlock the bootloader and enable partitions to be reflashed, run the fastboot flashing unlock command on the device. After setting, the unlock mode persists across reboots.

Can I use TWRP with locked bootloader? ›

If you want TWRP you need an unlocked bootloader and if you want a locked bootloader you can't have TWRP, deal with it.

Does rooting unlock bootloader? ›

Rooting is distinct from SIM unlocking and bootloader unlocking. The former allows removing the SIM card lock on a phone, while the latter allows rewriting the phone's boot partition (for example, to install or replace the operating system).

Why you shouldn't unlock bootloader? ›

More prone to Security flaws

If the bootloader of your device is unlocked then it's easy for a third person to remove the encryption from your device (screen locked via pin or password ) by using a custom Recovery.

Is it unsafe to unlock bootloader? ›

Vulnerabilities are typically caused when the device's bootloader is unlocked, as an unlocked bootloader enables the user to make many different changes to the device that the OEM would not typically allow. This can include flashing custom ROMs, sideloading programs, flashing recoveries and modifying system elements.

Can I unlock bootloader without USB debugging? ›

If I recall correctly, USB debugging should not be required to unlock the bootloader as you are using fastboot commands to unlock the bootloader rather than ADB commands.

Does factory reset remove TWRP? ›

Factory reset wipes only Data , Cache , and Dalvik. ) as they are located in Internal Storage/TWRP/Backups.

What happens if I wipe system in TWRP? ›

If you wipe system, it completely wipes out the OS, and there will be nothing to boot. Of course you can still get back to recovery. When you flash a rom, by default it should wipe the system for you and replace the system with the rom you are flashing.

What happens if you install the wrong TWRP? ›

If you install any custom recovery other than the recommended then there arises three cases, Broken Recovery- In normal situation it will be stuck in recovery mode and won't boot in recovery. Boot-Loop (Soft Brick)- Won't boot up the device and Stuck on starting Logo.

How do I use Fixboot command? ›

Type BOOTREC /FIXMBR and hit <Enter>. This command will attempt to fix any corruption issues with the master boot record. If all goes well, you should see The operation completed successfully. Next, type BOOTREC /FIXBOOT then hit <Enter>.

How do I bypass a repair drive? ›

  1. Fix 1: Check the Drive Status.
  2. Fix 2: Use Windows Error Checking Tool.
  3. Fix 3: Wait for the Completion of Scanning and Repairing.
  4. Fix 4: Disable Automatic Repair.
  5. Fix 5: Disable Fast startup Feature.
  6. Fix 6: Disable Check Disk on Booting.
  7. Fix 7: Run SFC Utility.
  8. Fix 8: Enter Safe Mode and Run CHKDSK.
Jan 13, 2023

Can you fix system boot failure? ›

Insert your Windows operating system disk and boot from that, and select 'Repair Your Computer' and then 'Command Prompt'. In Command Prompt, type chkdsk /r c: and press enter. Pressing the Y key will restart the system and run chkdsk automatically to repair any errors.

Can a corrupted BIOS be fixed? ›

If your motherboard has a backup BIOS, you can boot into the backup BIOS and reflash the corrupted BIOS. If your motherboard does not have backup BIOS, you may be able to replace the BIOS chip. However, in some cases, the only option may be to replace the motherboard entirely.

Will chkdsk fix boot problems? ›

Will chkdsk fix boot problems? Definitely yes; chkdsk has become more sophisticated and updated as technology advances. Over time it has become a very useful tool not only to scan but to fix various volume, system, and file errors.

Does factory reset fix Bootloop? ›

Part 4: Factory reset to fix Android bootloop issue.

However, if you have a Google account signed in on your Android device, you will be able to retrieve most of your data one the device turns on. To factory reset your Android boot loop device, you must first boot into the Recovery Mode screen.

Does overheating cause Bootloop? ›

It's a case of "the more heat the quicker it will bootloop, the less heat the slower it will take to bootloop" but either way it will get there eventually as the problem gets worse over time.

Can drivers cause boot loop? ›

An outdated driver can also cause a boot loop problem. To be on the safe side, make sure that your drivers are updated to the latest version.

How do I reboot my phone with TWRP? ›

You need to power off your phone first. Then, after it's shut down, hold simultaneously the 'Power' button and the 'Volume down' button for a few seconds (if this does not work out, try with Power and Volume Up - the combination might vary across devices). Then, release them and you should see a list with options.

Why does my Android keep booting into twrp recovery? ›

This usually happens when the ROM is not installed properly, try flashing the factory image and start over the process again, install the latest vendor firmware(if there's one) and install the latest TWRP and then flash the ROM file, In my experience you don't have to wipe the internal storage every single time if your ...

How do I run twrp recovery? ›

Case I: Devices with A-only partition scheme
  1. Copy the TWRP image to a suitable location on your PC. ...
  2. From your PC, open a command prompt/terminal and type: adb reboot bootloader.
  3. Rename the TWRP image to twrp.img and type: fastboot flash recovery twrp.img. ...
  4. Congrats!
Nov 3, 2022

How do I root my phone with twrp recovery? ›

How to Root using TWRP Recovery
  1. Make sure you have a custom recovery installed. ...
  2. Download the SuperSU file on your device. ...
  3. You can disconnect the device from PC.
  4. Reboot into recovery mode to get into TWRP recovery. ...
  5. [Optional] Create a backup.

Does flashing TWRP require unlocked bootloader? ›

On any Android device, you have to first unlock the bootloader to install TWRP Recovery. Again, each and every device has a different method of unlocking the bootloader. Some may have a complex method while some bootloaders can be unlocked by going to developer settings in the Android Settings.

How to reboot to bootloader using adb? ›

You can also use the command adb reboot bootloader to reboot directly into the bootloader. See Flashing instructions for full instructions. Press and hold Volume Down, then press and hold Power. Press and hold Volume Down, then press and hold Power.

What partitions should I backup in TWRP? ›

The default backup options in TWRP are system, data, and boot. For most cases, this is sufficient for backing up a ROM. (Note that in some rare cases, boot isn't available for backup on certain devices).

Where should I install TWRP boot or recovery? ›

What to Know
  1. Download Official TWRP app > open app > select Run with root permissions > OK.
  2. Next, select TWRP Flash > Allow > tap Select Device. Download and save latest TWRP image.
  3. In TWRP app, choose Select a file to flash > choose image file > Flash to Recovery.
Apr 23, 2022

Does twrp recovery need root? ›

Note: you don't need to root your device to install TWRP, but you will need to unlock the bootloader, which will erase all the content on your device. Also the method for unlocking the bootloader is different for each device, so your mileage will vary.

How do I use TWRP recovery without a computer? ›

Enable USB Debugging

On the phone that you want to install TWRP Recovery in, go to Settings > About Phone > and tap on the “Build number” seven-time to enable Developer Options. Now, go to the Developer Options and enable USB Debugging.

How to boot into TWRP recovery using ADB? ›

How to boot into recovery using ADB
  1. Once ADB is installed, connect your phone to your computer via a USB cable. Make sure USB Debugging is enabled in Developer Settings.
  2. Head over to the folder where you have installed ADB. ...
  3. Next, type in adb devices and hit enter to make sure your smartphone is properly connected.
Jan 10, 2023

Will installing TWRP wipe my device? ›

from my experience you will not lose your data flashing a recovery as it only flash over the /recovery partition. if you would go to install a new rom it is recommended to wipe everything.

Does resetting phone remove TWRP? ›

Does that delete the TWRP directory (folder) and its contents as well (which contains the Nandroid backups)? Yes, if your TWRP backups are stored in internal sdcard, factory reset from settings will wipe the internal sdcard and remove your TWRP folder and the backups contained in that folder.

Can you install TWRP with locked bootloader? ›

If you want TWRP you need an unlocked bootloader and if you want a locked bootloader you can't have TWRP, deal with it.

Can I install Magisk with TWRP? ›

You need to install TWRP --> TWRP. You need to download magisk CANARY ( At the end of the post) Put it in your phone and boot TWRP. Flash it, format data and reboot your phone.


1. TWRP Recovery Stuck on Boot • SOLVED • TWRP Stuck at Splash Screen | Fixed
(Hindi Tech Video)
2. FIX bootloop || TWRP Error || Flashing Stock ROM || SOLVED Samsung A12
3. Fix Bootloop setelah pemasangan TWRP
(Android Buff Tech)
4. Fix TWRP Bootloop in 1 minute
5. Samsung Galaxy A7 2018 A750FN TWRP INSTALL | TWRP Black Screen Fix Bootloop Fix
(Modding 922)
6. How to Remove Magisk Module with Twrp || How to fix Bootloop with Twrp Without formatting Data
(Technical Mundeer)
Top Articles
Latest Posts
Article information

Author: Reed Wilderman

Last Updated: 02/27/2023

Views: 6169

Rating: 4.1 / 5 (52 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Reed Wilderman

Birthday: 1992-06-14

Address: 998 Estell Village, Lake Oscarberg, SD 48713-6877

Phone: +21813267449721

Job: Technology Engineer

Hobby: Swimming, Do it yourself, Beekeeping, Lapidary, Cosplaying, Hiking, Graffiti

Introduction: My name is Reed Wilderman, I am a faithful, bright, lucky, adventurous, lively, rich, vast person who loves writing and wants to share my knowledge and understanding with you.